CP 80 - 903 K

With three high pressure hydraulic thrust diaphragms.  CATTERINPOMPE pumps feature a high resistance to corrosion thanks to the use of brass and stainless steel for the parts in contact with the liquid. Semiautomatic adjuster valve.

Available versions:

• 1" 3/8M and 1" 3/8M through shaft.
• 1" 3/8M and 1" 3/8F through shaft.
• 1" 3/8M cardan shaft.

CP 104 - 1204 K

With four high pressure hydraulic thrust diaphragms. CATTERINPOMPE pumps feature a high resistance to corrosion thanks to the use of brass and stainless steel for the parts in contact with the liquid. Semiautomatic adjuster valve.

Available versions:

• 1" 3/8M and 1" 3/8M through shaft.
• 1" 3/8M and 1" 3/8F through shaft.
• 1" 3/8M cardan shaft.

CP 115 - 125 K

With three high pressure hydraulic thrust diaphragms.  CATTERINPOMPE pumps feature a high resistance to corrosion thanks to the use of brass and stainless steel for the parts in contact with the liquid. Semiautomatic adjuster valve.

Available versions:

• 1" 3/8M and 1" 3/8M through shaft.
• 1" 3/8M and 1" 3/8F through shaft.
• 1" 3/8M cardan shaft.

Size: 260k

CP 150 - 165 K

With four high pressure hydraulic thrust diaphragms. CATTERINPOMPE pumps feature a high resistance to corrosion thanks to the use of brass and stainless steel for the parts in contact with the liquid. Semiautomatic adjuster valve.

Available versions:

• 1" 3/8M and 1" 3/8M through shaft.
• 1" 3/8M and 1" 3/8F through shaft.
• 1" 3/8M cardan shaft.

CP 230 - 250 K

With six high pressure hydraulic thrust diaphragms. CATTERINPOMPE pumps feature a high resistance to corrosion thanks to the use of brass and stainless steel for the parts in contact with the liquid. Semiautomatic adjuster valve.

Available versions:

• 1" 3/8M and 1" 3/8M through shaft.
• Reduction unit R = 1:3.50.
• Ø 30 mm parallel pinion.

Size: 250k

CP 143 PROFESSIONAL

With three high pressure hydraulic thrust diaphragms.  CATTERINPOMPE pumps feature a high resistance to corrosion thanks to the use of brass and stainless steel for the parts in contact with the liquid. Semiautomatic adjuster valve.

Available versions:

• 1" 3/8M and 1" 3/8M through shaft.
• 1" 3/8M cardan shaft.

Size: 246k

170 K

Specific pumps to spray medium and large crop areas applicable to both towed and mounted sprinklers and sprayers.
The external manifolds of the pumps manufactured by CATTERINPOMPE snc can be easily inspected. They are long-lasting and reliable, guaranteed by mechanisms in oil baths and maximum rust resistance. This is ensured by the use of brass and stainless steel for those parts in contact with the liquid. The system features a semi-automatic regulation valve.

Available versions:

• 1"3/8M and 1"3/8M through-shaft
• 1"3/8M and 1"3/8F through-shaft.

Size: 220k

CP 184 PROFESSIONAL

With four high pressure hydraulic thrust diaphragms.  CATTERINPOMPE pumps feature a high resistance to corrosion thanks to the use of brass and stainless steel for the parts in contact with the liquid. Semiautomatic adjuster valve.

Available versions:

• 1" 3/8M and 1" 3/8M through shaft.
• 1" 3/8M cardan shaft.

PA 730

Three piston semi-hydraulic diaphragm pump.
Versions available:

• VC - Front spline shaft 1" 3/8
           Rear standard 6 holes.
• VM - Front male spline shaft 1" 3/8
            Rear female spline shaft 1"3/8

PA 1108

Three piston semi-hydraulic diaphragm pump.
Versions available:

• VC - Front spline shaft 1" 3/8
           Rear standard 6 holes.
• VM - Front male spline shaft 1" 3/8
            Rear female spline shaft 1"3/8
• VD - Spline thru shaft 1"3/8

• Low Pressure Pumps
• Medium Pressure Pumps
• High Pressure Pumps
• Piston Pumps
• Control Units - Medium / high Pressure
• Remote Control Units - Low Pressure
• Wheel Barrow Units
• Motor Pump Units

Size: 933k

Specifications on Control Units

Size: 162k

ELP 330

Size: 78k