A wide range of products makes it simple to identify the right type of filter to meet any requirement. The cartridges of the line filters have been colour-coded to identify the mesh scale, and therefore the filtering power, for an easier choice of the correct filter to be installed in a plant or on a machine.

C = colour
MESH = number of wires for inch (25.4 mm)
A = mesh opening
Ø = wire diameter
S = percentage ratio between mesh opening surface and mesh total surface
M = material

Suction floating filter

This suction filter is designed to operate a few centimeters beneath the water surface, thus preventing any risk of obstruction caused by the mud lying on the bottom or debris floating on the surface. The filter floats thanks to a closed-cell foam ring that prevents it from sinking even in case of accidental breakage. A counterweight ensures adequate balancing so that the suction point is always just beneath the water surface. The plastic parts are made of top-quality polypropylene while the ample filtering surface is built with stainless steel. The floating filter is available with five different coupling diameters for the suction pipe.

Foot strainers

Thanks to the walls built with double criss-crossing relief grating, obstructions can be removed quite easily. The trapezoidal shape and chamfered corners ensure complete suction in every position without damaging tank walls.